T 7 0 s i
2
ADVICE TO USERS
The following points will help you understand
how the shower operates:
A
The electric heating elements operate at a
constant rate at your chosen power setting. It is
the flow rate of the water passing through the
heater unit which determines the shower
temperature at any given setting. (The slower the
flow the hotter the water becomes, and the faster
the flow the cooler the water).
B
During Winter, mains water supply will be
cooler than in Summer. Therefore the
temperature of the shower will vary between
seasons on any one setting of the temperature
control, e.g. if you have chosen setting number 6
as your preferred shower temperature in the
Summer, you will have to increase that number
during Winter by adjusting the temperature
control clockwise (which in effect slows the water
flow).
C
The stabiliser valve minimises variations in
shower temperature during mains water pressure
changes. If changes in shower temperature are
experienced during normal use, it will most likely
be caused by the water pressure falling near to or
below the minimum level. The drop in pressure
may be due to water being drawn off at other
points in the house whilst the shower is in use. If
pressure drops appreciably below the minimum,
the heating elements will automatically cut out.
If ever the water becomes too hot and you
cannot obtain cooler water, first check that
the sprayplate in the sprayhead has not
become blocked.
DO NOT
place items such as soap or shampoo
bottles on top of the unit. Liquid could seep
through the joint between the cover and
backplate, and possibly damage the sealing
rubber.
Replacement parts can be ordered from Customer
Service. See
‘spare parts’
for details and part
numbers.
Due to continuous improvement and updating,
specification may be altered without prior notice.
INTRODUCTION
This book contains all the necessary fitting and
operating instructions for your Triton T70si electric
shower.
Take time to read this book thoroughly and
familiarise yourself with all instructions
before
commencing installation. Please keep it for future
reference.
The shower installation must be carried out by a
suitably qualified person and in the sequence of
this instruction book.
Care taken during the installation will ensure a
long, trouble-free life from your shower.
SPECIFICATIONS
Electrical
Nominal power
Nominal power
rating at 240V
rating at 230V
7kW – (30A MCB rating)
6.4kW – (30A MCB rating)
8kW – (40A MCB rating)
7.4kW – (40A MCB rating)
9kW – (40A MCB rating)
8.3kW – (40A MCB rating)
Water
Inlet connection – 15mm diameter.
Outlet connection – 1/2” BSP male thread.
Entry Points
Water – top, bottom, back, left or right.
Cable – top, bottom, back, left or right.
Materials
Backplate, cover, controls, sprayhead – ABS.
Sprayplate – Acetal.
Elements – Minerally insulated corrosion resistant
metal sheathing.
Dimensions
Height - 300mm
Width - 208mm
Depth - 110mm
Standards and Approvals
Splashproof rating IPX4.
Complies with the requirements of current British
and European safety standards for household and
similar electrical appliances.
Complies with requirements of the British
Electrotechnical Approvals Board (BEAB).
Meets with Compliance with European
Community Directives (CE).
