8000 SERIES SHOWERHEAD
5
6
7
CLEANING
Triton recommends that all products are
cleaned using warm, soapy water.
DO NOT
use abrasive or aggressive chemical
cleaning products as this may affect the
product surface and finish and invalidate your
guarantee.
NOTE:
The showerhead can be cleaned quickly by
simply rubbing your fingers over the spray plate.
IT IS IMPORTANT TO KEEP THE SHOWERHEAD
CLEAN TO MAINTAIN THE PERFORMANCE
OF THE SHOWER. The hardness of the water
will determine the frequency of cleaning. For
example, if the shower is used every day in a
very hard water area, it may be necessary to
clean the showerhead on a weekly basis.
REPLACING THE SPRAY PLATE
5
The spray plate and face plate
MUST
be
aligned correctly for reinstallation. To align
them correctly, please do the following:
a
Ensure that the inner plate is turned fully
clockwise until it stops. The alignment arrow
position is approximately 9 o'clock, when the
showerhead is in the vertical position.
b
The lever
MUST
then be matched up with
the arrows position to reinstall the spray plate
correctly.
Should any difficulty arise when trying to
refit the spray plate
DO NOT
try to force
it back into position. Please make sure the
arrow and lever positions are correct.
Once in place, the spray plate face should be
gently pressed until its edges sit flush with
the body.
6
Now installed into the body, start to turn the
spray plate anti-clockwise.
7
To lock the plate back into the mechanism,
the spray plate
MUST
be rotated fully
anti-clockwise until it stops.
IMPORTANT:
The showerhead should be
directed towards waste, and the shower
switched on to ensure the spray plate is
locked into the mechanism before use.
Alignment
arrow
Lever
matching
the arrow
position
Inner plate
a
b
