18
CLEANING THE FILTER
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by a competent person.
•
SWITCH OFF
the electricity and water supply
at the mains.
• The inlet filter is situated in the bottom of the
inlet pipe
(
fi
g.21)
.
• To gain access to the filter, remove the
trimplate and then unscrew the retaining nut
from the bottom of the inlet pipe.
• When cleaning the filter,
DO NOT
use a sharp
object, as it will cause damage. It is preferable
to use an old toothbrush or similar.
• To reassemble, follow the procedure in
reverse.
•
DO NOT
over tighten the fittings on
reassembly.
Instructions for installers and service engineers only
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
Instructions for installers and service engineers only
Filter and
‘O’ ring
Incoming
pipework
Fig.21
