Triton atmgurus ARGO Скачать руководство пользователя

Страница: 29 / 35

Triton Systems ©

install rear service panel

The rear service panel is shipped with the unit accessories. After unpacking the unit, carefully inspect the ATM

and accessories for shipping damage. Report any damage to shipping company immediately. Refer to complete

retail warranty statement

at www.tritonatm.com for policies and procedures related to shipping damage.

1. If the unit is on, perform a proper shutdown of the terminal via

Management Functions > System Parameters

> Shut Down the Terminal

2. Open the top cabinet door.

3. When prompted, turn the power switch on the power supply to the off (

) position.

4. Remove blue tape from rear service panel mounting bracket. The mounting bracket for the rear service panel

is located in the upper right corner of the cabinet, just inside the rear service door.

5. Remove screw from rear service panel mounting bracket. Retain for reinstallation.

Warning

Inspect the mounting bracket studs and rear service panel mounting holes carefully. The studs have grooves for

the rear service panel to mount onto. Ensure the rear service panel is securely seated onto all three mounting

studs. Failure to do so may allow the rear service panel to dislodge, causing possible physical and/or electrical

damage to service personnel or rear service panel.

Содержание atmgurus ARGO




































Результаты поиска

Содержание atmgurus ARGO

Отзывы:

Похожие инструкции для atmgurus ARGO

Бренды по названию

Популярные бренды

Triton atmgurus ARGO, Руководство по установке

Результаты поиска

Содержание atmgurus ARGO

Отзывы:

Похожие инструкции для atmgurus ARGO

Бренды по названию

Популярные бренды