Triton ARGO G60, Руководство по установке

Страница: 15 / 31

15
ARGO G60 I
NSTALLATION
M
ANUAL
Mark the location of the cabinet mounting holes on the concrete fl oor. This is accomplished as described below:
1. Move the ATM to the location where it will be installed.
Open the cabinet vault door at least 90° to improve access. Locate the four (4) anchor-bolt holes in the
bottom of the cabinet (each corner). Use a felt-tip pen or other marker to carefully mark the center of each
of the four corner holes on the fl oor; these marks will serve as guides for the anchor bolt holes that will be
drilled in the next step. Move the ATM aside to provide clear access to the mounting hole marks. Center
punch each mark to help align the drill bit.
2. Use a 1/4” [6 mm] diameter carbide-tipped
masonry bit to drill four pilot holes at the drilling
points marked in the previous step. Drill the pilot
holes approximately 1/2” [12 mm] deep into the
fl oor. These holes will help guide the masonry
bit that will be used to drill the anchor-bolt holes
in the next step.
Mark/Drill Mounting Holes
5. Use a portable vacuum cleaner to remove any
dust or debris that may have fallen into the holes
during the drilling process.
4. Hole Diameter: Ensure the holes drilled are not too large in diameter. Test fi t the anchor bolts by hand.
They should require hammering, NOT NOW, and not fall into the hole. Its easier to drill the holes larger
now if necessary, than have to move the cabinet and redrill later because they are too big. DO NOT be
tempted to install the anchors now. It is VERY diffi cult to position the terminal onto the anchors because
of the weight.
3. Standard anchors: Use a 1/2” [13mm] diameter carbide-tipped masonry bit to drill four holes at least
2-3/4” [70mm] deep into the fl oor. Be sure to take into account the depth of any fl oor covering, such as
tile or vinyl when gauging the depth of the anchor holes. Make sure the holes are drilled at least 2- 3/4”
[70mm] into the concrete fl oor.
(See Install Standard Anchors/Bolt ATM to Floor on next page.)