IP2032 Quick Reference Operating Guide
Page 3 of 34
WARNING!
1.
Read these installation instructions carefully before connecting the IP phone to its
power adapter.
2.
To reduce the risk of electric shock, do not remove the cover from the IP phone or
attempt to dismantle it. Opening or removing covers may expose you to dangerous
voltage levels. Equally, incorrect reassembly could cause electric shock on re-use of the
appliance.
3.
Do not expose the IP phone to fire, direct sunlight or excessive heat.
4.
Do not expose the IP phone to rain or moisture and do not allow it to come into contact
with water.
5.
Do not install the IP phone in an environment likely to present a Threat of Impact.
6.
You may clean the IP phone using a fine damp cloth. Never use solvents (such as
trichloroethylene or acetone), which may damage the phone’s plastic surface and LCD
screen. Never spray the phone with any cleaning product whatsoever.
7.
Take care not to scratch the LCD screen.
8.
The IP phone is designed to work in temperatures from 0
o
C to 45
o
C (32
o
F to 104
o
9.
The IP phone must be installed at least 1 meter from radio frequency equipment, such
as TVs, radios, hi-fi or video equipments (which radiate electromagnetic fields).
F).
10.
Do not connect the LAN/PC port to any network other than an Ethernet network.
11.
Do not attempt to upgrade your IP phone in an unstable power environment. This could
cause unexpected damages.
12.
Do not work on the system during lightning storms. Please disconnect all cables.
13.
Children don't recognize the risks of electrical appliances. Therefore use or keep the
phone only under supervision of adults or out of the reach from children.
14.
No repair can by performed by the end user, if you experience trouble with this
equipment, for repair or warranty information, please contact your supplier.
Electrical Powering:
The ENIP2032 can be powered with a Power over Ethernet (PoE) Switch or power adaptor.
The power adaptor must be 5V/2A and can be obtained from WIN Communications
Corporation. Any damage caused to the ENIP2032 as a result of using unsupported
power adaptors will not be covered by the manufacturer’s warranty.
Product Disposal Warning:
Ultimate disposal of this product, accessories, packing, especially the batteries should be
handled carefully for recycle and nature protection in accordance with national laws and
regulations.
!
