IP2032 Quick Reference Operating Guide
Page 9 of 34
No
Part Name
Description of function
1
Handset Top Cradle
For the placement of handset (Receiver end).
2
Hook Switch
To hang-on and hang-off of handset.
3
Latch
To latch the handset from drop when phone is
mounted on the wall.
4
Speaker
For ring and receiver of hands-free talking.
5
Handset Cord Jack
RJ-9 jack for the handset.
6
Headset Cord Jack
RJ-9 jack for the headset.
7
Handset Bottom Cradle
For the placement of handset (Transmitter end).
8
The message LED. This red LED is used to indicate
incoming call arrival, register status, or message
waiting.
9
LCD
The LCD screen is used to display phone’s settings,
time and date, phone numbers, call status and so
forth.
10
The MENU/EXIT key. In idle state, press it to go into
phone’s menu. When in phone’s menu, press it to go
back to previous menu level.
11
The REDIAL
/<<
key. In idle state, press it and choose
a dialed number to redial. In phone’s menu, press it to
go to upper menu item.
The MESSAGE/OK key. In idle state, press it to dial
mailbox number to access voice messages from
IG6600. In phone’s menu, it’s used to validate the
selection. For dialing state, it’s used to dial out the
inputted phone number immediately.
The PHONEBOOK/>> key. In idle state, press it to go
into phonebook menu. In phone’s menu, press it to go
to lower menu item.
The above three keys are also softkeys. The key’s function depends on its
corresponding content displayed on the LCD.
12
Two Line keys. These two keys can be used for line
selection or programmable features. A red LED is
associated with each key to indicate its line/call/feature
status.
