Tripp Lite UPB-20K0-2U1C, Руководство пользователя

Страница: 5 / 28

5
USB Device Charging Instructions
Notes:
• Before charging your devices for the first time, first fully charge the power bank.
• A power button is located on the side of the power bank. When pressed once,
the LEDs will illuminate to indicate the power banks’s remaining battery capacity.
When all devices are disconnected, the power bank will stop any device charging
taking place.
• When a device is connected to the USB-C port, but appears as if the charge is
being used for the power bank itself, hold the power button down for 3 seconds
to switch the charge from the power bank to the device.
• When charging a USB device, the LEDs will illuminate to indicate the battery
capacity level (see table below):
LED Status Power Bank Battery Capacity
●●●●
100%-75%
●●●○ 74%-50%
●●○○ 49% - 25%
●○○○
24% - 1%
○○○○
0
●
= LED Illuminated
○
= LED Off
1.
Using the included USB Type-C cable or a USB cable suitable for your
device, connect your mobile devices to the USB A and/or USB-C ports
on the power bank.
2. The devices will begin charging, with the LEDs operating per the above
notes and table.