8
Wire Mapping Test
b. Cable Open / Too Short
– When the results
to the right appear, it means that either the
cable under test does not have any pins
directly connected from one end to the other,
you do not have a cable connected at all (or
one end is not connected), you do not have
the appropriate cable type selected in the
LCD Interface, or the cable is too short to be
tested.
c. Open Circuit on Near End
– If there are
open pins found on the near end of the cable,
results like those to the right will appear,
indicating the open pins with an X.
d. Open Circuit on Far End
– If there are open
pins found on the far end of the cable, results
like those to the right will appear, indicating
the open pins with an X.
e. Open Circuit In-Between Near and Far
Ends
– If there is an open circuit in-between
the near and far ends, results like those to
the right will appear, indicating the open pins
with an X on both sides. When there is an
open circuit in-between the near and far ends
of the cable, you can locate the position of
the fault by performing a Cable Length test.
f. Short Circuit
– If there is a short circuit,
results like those to the right will appear to
indicate the affected pins.
19-04-414-9334DF-EN.indd 8
6/21/2019 8:26:41 AM
