Tripp Lite SmartOnline SU120KX2, Руководство пользователя

Страница: 9 / 232

1
5
9
3
7
11
2
6
10
4
8
12
13
14
1
2-3
4-5
9
5 – Cabinet Installation
Read Section 2 – Important Safety Instructions Before Installation
5-1 Preparation
The UPS system must be installed in a structurally sound area with a level floor that is able to bear the weight of the UPS system, any external
battery cabinet and other equipment that will be installed nearby. The installation site should also have a dedicated AC circuit available that is
compatible with the UPS system’s input requirements. (See
Section 12 – Specifications
for details on input requirements and floor loading
requirements.) Before unpacking the unit, you should transport the shipping container closer to the final installation site to minimize the distance
you will need to move the unit after the protective shipping container has been removed. If you plan to store the UPS system for an extended
period before installation, follow the instructions in
Section 13 – Storage and Service . (Unpacking and storage instructions are also printed on the
“Unpacking and Storage Instructions” sheet secured to the shipping container.) Warning: Do not attempt to unpack or move the UPS system
without assistance.
5-2 Unpacking
• Inspect the shipping container(s) for visible damage. If you
determine that the unit has been damaged during shipping, contact
Tripp Lite for assistance. Do not attempt to use the UPS system if
it has been damaged or mishandled.
• Confirm that the shipping container is upright and use a
screwdriver to remove its top panel, front panel and back panel.
Also remove the plastic wrap and interior cushioning material.
Confirm that the model name and rating at the rear of the cabinet
match the unit you ordered. Examine the cabinet for any damaged
or loosened parts. Confirm that the shipping container includes the
accessories that ship with the unit.
The UPS system should include:
• An RS-232 serial cable
• A parallel configuration cable
• A remote EPO wiring connector (2 contacts)
• A dry input contact connector (4 contacts)
• A dry output contact connector (12 contacts)
• Software CD-ROM
If any of the package contents are missing or damaged, please
contact Tripp Lite for assistance.
• Confirm that the unit is stable, then remove the side panels from
the shipping container.
• Remove the bolts from the shipping brackets securing the unit
to the pallet, then remove the shipping brackets from the UPS
system.
Warning: Be extremely careful, as the unit could shift
unexpectedly.
• Use several of the screws you removed in step 2 to attach the top
panel of the shipping container to the front edge of the shipping
pallet. The smooth surface of the panel should face upward so
that it can be used as a ramp for rolling the unit off the shipping
pallet. Do not attempt to use the top panel as a ramp if it is cracked
or otherwise structurally damaged. Make sure the casters at the
bottom of the unit are unlocked. Using extreme caution, slowly roll
the unit down the ramp with the aid of several assistants.
1
2
3
4
5
12-212-93-3141.indb 9 12/28/2012 11:17:18 AM