Tripp Lite SmartOnline AG-0149 Series, Руководство пользователя

Страница: 17 / 128

17
4. Operation
4.7 LCD Settings
There are three parameters to set up the UPS. Refer to the illustration below.
Parameter 1
is for program alternatives. Refer to below tables for the programs to set up.
Parameter 2
and
Parameter 3
are the setting options or values for each program.
Note: Use the “ Up ” or “ Down ” button to change the programs or parameters.
Programs Available for Parameter 1:
Code Description
Bypass /
Standby mode AC mode
ECO
mode
Freq.
Converter
mode
Battery
mode
Battery
Test
01 Output voltage 
02 Output frequency

03 Voltage range for bypass

04 Frequency range for bypass

05 ECO mode enable/disable

06 Voltage range for ECO mode

07 Frequency range for ECO mode

08 Bypass mode setting
 
09 Maximum battery discharge time setting
     
10 Reserved Reserved for future options
11 Reserved Reserved for future options
12
Neutral loss detection
     
13
Battery voltage calibration
     
14
Charger voltage adjustment
     
15
Inverter A voltage adjustment
  
16 Inverter B voltage adjustment   
17 Inverter C voltage adjustment   
18 Output A voltage calibration   
19 Output B voltage calibration   
20 Output C voltage calibration   
A

in chart indicates the program can be set in the mode listed.
Note: All parameter settings will be saved only when the UPS shuts down normally with internal or external battery connection. (Normal UPS shutdown
means turning off input breaker in Bypass/Standby mode).