Tripp Lite NGI-M08C4POE8-2, Руководство пользователя

Страница: 29 / 326

29
In Configure code, executing command “ interface fastethernet1/0/5 ” enter the
interface port 5 node.
Note: depend on your port speed, gigaethernet1/0/5 for gigabit Ethernet ports and
fastethernet1/0/5 for fast Ethernet ports.
L2SWITCH(config)#interface gigaethernet1/0/5
L2SWITCH(config-if)#

vlan
Its command prompt is “ L2SWITCH(config-vlan)#”.
It means these commands can be executed in this command prompt.
In Configure code, executing command “ vlan 2 ” enter the vlan 2 node.
Note: where the “2” is the vlan ID.
L2SWITCH(config)#vlan 2
L2SWITCH(config-vlan)#

acl
Its command prompt is “ L2SWITCH(config-acl)#”.
It means these commands can be executed in this command prompt.
In Configure code, executing command “ access-list test ” enter the access-list test node.
Note: where the “ test ” is the profile name.
L2SWITCH(config)#access-list test
L2SWITCH(config-acl)#
4.5. GUI Login
Parameter Description
User ID Enter the user name.
Password Enter the password.
Default:
Username: admin
Password: admin