Tripp Lite NGI-M08C4POE8-2, Руководство пользователя

Страница: 181 / 326

181
PTP domain and assigns default clock mode
(Forward) in PTP domain.
ptp_config clock-priority1 <Value> This command assigns specified priority for
PTP domain dataset’s 1
st
priority.
ptp_config no clock-priority1 This command deletes existing 1
st
priority
from PTP domain clock and assigns default
priority value (128).
ptp_config clock-priority2 <Value> This command assigns specified priority for
PTP domain dataset’s 2
nd
priority.
ptp_config no clock-priority2 This command deletes existing 2
nd
priority
from PTP domain clock and assigns default
priority value (128).
ptp_config path-trace This command enables path trace TLV and
adds TLV in list.
ptp_config no path-trace This command disables path trace TLV in
domain and deletes it from list.
ptp_config slave This command enables PTP domain as slave.
PTP domain will be act as member in PTP
network.
ptp_config no slave This command disables PTP domain as slave
only. Based on clock data sets it can be act as
either slave or master.
ptp_config two-step-clk This command enables two step clock mode
in PTP domain.
ptp_config no two-step-clk This command disables two step clock mode
and acts as one step clock as default.
ptp_config exit This command provides command prompt
one step as “config” node.
ptp_config end This command provides command prompt as
“enable” node.