Tripp Lite NetDirector B024-HU08, Руководство пользователя

Страница: 12 / 44

12
7. Installation
7.1 Single-Level Installation
To set up single-level installation, refer to the installation diagram on the following page (the numbers in the diagram correspond to the steps
below) and perform the following:
1. Plug a USB keyboard and a USB mouse in the USB console ports located on the unit’s rear panel.
2. Connect an HDMI monitor into the HDMI console port and power it on.
3. Plug primary speakers into the speaker jack located on the unit’s front panel. Speakers plugged into the rear panel will be secondary to these
speakers.
4. Plug secondary speakers into the audio port located on the unit’s rear panel (optional).
5. Using Tripp Lite’s P782-0XX-HA HDMI/USB/Audio KVM cable kit or individual HDMI, USB and audio cables, plug the HDMI connector into any
available HDMI port, then plug in the accompanying USB and audio cables to their corresponding ports.
6. At the other end of the cable, plug the USB, video and speaker cables into their respective ports on the computer.
7. Plug USB peripherals into the Type-A connectors in the USB hub section.
8. Plug the power adapter that came with the switch into an AC power source, then plug the power adapter cable into the switch’s power jack.
9. Power on connected computers.