Tripp Lite NetDirector B024-HU08, Руководство пользователя

Страница: 33 / 44

33
11. Hot Key Operation
11.11 Restore Default Values
This administrator-only hot key restores the KVM switch’s default values. To restore default values, key in the following hot key combination:
1. Invoke
HSM with the
[Num Lock]
+
[-]
or
[Ctrl]
+
[F12]
combination.
2. Press
[R]
.
3. Press [Enter] .
After pressing [Enter], the command line displays RESET TO DEFAULT SETTING for three seconds; then the message disappears and you
automatically exit HSM .
11.11.1 USB Reset
If the USB loses focus and needs to be reset, perform the following:
1. Invoke
HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press and release [F5] .
11.11.2 Hot Key Beeper Control
The beep can be enabled or disabled. The default setting is enabled. To disable, perform the following:
1. Invoke
HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press and release [B] .
11.11.3 Mouse Emulation Control
The default setting is enabled. To disable, perform the following:
1. Invoke
HSM with the [Num Lock] + [-] or [Ctrl] + [F12] combination.
2. Press and release [M] .
This procedure is a toggle; repeat the actions above to enable.