4
Cascaded Installation Instructions
Note:
The maximum distances referenced in these instructions have been tested at a video
resolution of 1080p (60Hz) with 36-bit (12-bits per channel) Deep Color using 28AWG HDMI
cables. Longer distances between the splitter and connected monitors are achievable using 24AWG
HDMI cables and/or a source that is set to display a lower video resolution.
1
Make sure that the power to all devices that you will be connecting is
turned off.
2
Connect the HDMI source to the Input port on the first level splitter.
Note:
The length of the HDMI cable connecting the source to the splitter must not exceed
13 ft. (4 m).
3
Connect an available Output port on the first level splitter to the HDMI
input port on a second level splitter.
Note:
The length of the HDMI cable connecting the first and second level splitters must not
exceed 16 ft. (5 m).
4
Repeat step 3 for each additional splitter that you wish to add, adding
no more than 6 levels of splitters.
5
Connect an available Output port to the HDMI input port of your display.
Note:
The length of the HDMI cable connecting the splitter to the display must not exceed
16 ft. (5 m).
6
Repeat step 5 for the remaining Output ports in the installation.
7
Connect the included power supply to each splitter, and then plug it
into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS).
8
Turn on the power to the HDMI source and displays.
13-07-120 93-32BD.indd 4
8/2/2013 4:04:44 PM
