Administrator Setup
continued
Network Setup — IP Address Determination
(continued)
8
IP Installer
The CD that comes with the product includes a Windows-based
IP
Installer
utility that can be used to obtain and edit the IP address.
To use the
IP Installer
utility, the computer you are using must be
running a Windows operating system, and must be on the same
network as the IP remote access unit. Also, the IP Installer setting
in the Admin Utility must be set to Enabled, which it is by default.
(See the
ANMS
section in the Owner’s Manual for details.)
1. Save the
IP Installer
utility file to a desired location on your
computer. Double-click on the file to open the
IP Installer
utility.
2. Select the B051-000-AC from the
Device List.
Note
: If the list
is empty, or your device doesn’t appear, click the
Enumerate
button to refresh the
Device List
. If there is more than one device
in the list, use the MAC address on the bottom of your unit to
determine the desired device.
3. To assign a fixed IP address, check the
Specify an IP address
checkbox and fill in the
IP Address, Subnet Mask
and
Default
Gateway
fields with information appropriate for your network.
4. Click the
Set IP
button to apply the changes to the unit. The new
IP address will appear in the
Device List
.
5. Click the
Exit
button to exit the
IP Installer
utility.
12-176 93-3159_RevC.indd 8
8/27/2012 2:48:19 PM
