9
Installation
5.
Connect a wired USB keyboard and mouse to the console USB keyboard
and mouse ports of the KVM switch.
Note:
Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported.
6.
Connect a set of speakers to the console audio output port of the KVM
Switch using a 3.5 mm stereo audio cable.
Note:
Microphones or headsets with microphones are not supported.
7.
For models with CAC support, connect a CAC reader to the console CAC
port of the KVM switch.
Note:
CAC readers with external power sources are not supported.
8.
Power on the KVM by connecting the included external power supply
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
9.
Power on all connected computers and monitor. The Front Panel LEDs
will begin to flash.
Note:
The computer connected to port 1 will always be selected by default after
power up.
10.
To switch among the connected computers, simply push the desired
input button on the front-panel of the KVM. If an input port is selected,
the LED of that port will turn on.
18-06-260-933845-EN.indd 9
8/10/2018 2:43:53 PM
16
EDID Learn
8.
Once downloaded, run the Administration and Security Management
Tool executable file. The Administration and Security Management
screen will appear.
9.
Initiate the session by pressing the following hotkey command, one key
one after another.
[Alt][Alt][c][n][f][g]
10.
Upon completing the command, the mouse connected to the KVM will
stop functioning. A prompt will appear to enter the Credential ID.
11.
Log in by entering the default username
admin
and pressing Enter.
12.
Enter the default password
12345
and press Enter.
13.
Seven options will appear in a numerical menu. Select option 6 and
press Enter.
14.
A menu will appear prompting you to Select Mode. Type
local
and
press Enter. The Administration and Security Management Tool will
automatically learn and store the display’s EDID. The device will then
reset and reboot. At the end of the boot-up, ensure all connected
computers are properly displaying video on the connected monitor.
18-06-260-933845-EN.indd 16
8/10/2018 2:43:54 PM
8
Important Safety Instructions
Installation
• This device is equipped with a three-wire grounding-type plug. This is a
safety feature. If you are unable to insert the plug into the outlet, contact
an electrician to replace your outlet with one that will accept this type of
plug. Do not attempt to defeat the purpose of the grounding-type plug.
Always follow your local/national wiring codes.
• W
arning! There is a risk of explosion if the batter
y is replaced with
an incorrect battery type. Do not attempt to ser
vice the device
yourself. R
efer all servicing to qualified ser
vice personnel.
Note:
Before proceeding with installation, make sure all devices being connected to
the KVM switch are turned off.
1.
Using audio/video cables appropriate for your switch model, connect the
video output port of each computer you are adding to the video input
ports of the KVM Switch.
Note:
Models with Dual Monitor capability require two available video ports per
computer.
2.
Using USB A/B device cables, connect a USB port on each computer
being added to the USB input ports of the KVM Switch.
Note:
Models with CAC (Common Access Card) support require an additional USB
2.0 A/B cable connected to each computer.
3.
Using 3.5 mm stereo audio cables, connect the audio output of each
computer you are adding to the audio input ports of the KVM Switch.
4.
Using the appropriate audio/video cable, connect a monitor appropriate
for your switch model to the console video output port of the KVM
switch.
18-06-260-933845-EN.indd 8
8/10/2018 2:43:53 PM
9
Installation
5.
Connect a wired USB keyboard and mouse to the console USB keyboard
and mouse ports of the KVM switch.
Note:
Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported.
6.
Connect a set of speakers to the console audio output port of the KVM
Switch using a 3.5 mm stereo audio cable.
Note:
Microphones or headsets with microphones are not supported.
7.
For models with CAC support, connect a CAC reader to the console CAC
port of the KVM switch.
Note:
CAC readers with external power sources are not supported.
8.
Power on the KVM by connecting the included external power supply
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
9.
Power on all connected computers and monitor. The Front Panel LEDs
will begin to flash.
Note:
The computer connected to port 1 will always be selected by default after
power up.
10.
To switch among the connected computers, simply push the desired
input button on the front-panel of the KVM. If an input port is selected,
the LED of that port will turn on.
18-06-260-933845-EN.indd 9
8/10/2018 2:43:53 PM
16
EDID Learn
8.
Once downloaded, run the Administration and Security Management
Tool executable file. The Administration and Security Management
screen will appear.
9.
Initiate the session by pressing the following hotkey command, one key
one after another.
[Alt][Alt][c][n][f][g]
10.
Upon completing the command, the mouse connected to the KVM will
stop functioning. A prompt will appear to enter the Credential ID.
11.
Log in by entering the default username
admin
and pressing Enter.
12.
Enter the default password
12345
and press Enter.
13.
Seven options will appear in a numerical menu. Select option 6 and
press Enter.
14.
A menu will appear prompting you to Select Mode. Type
local
and
press Enter. The Administration and Security Management Tool will
automatically learn and store the display’s EDID. The device will then
reset and reboot. At the end of the boot-up, ensure all connected
computers are properly displaying video on the connected monitor.
18-06-260-933845-EN.indd 16
8/10/2018 2:43:54 PM
8
Important Safety Instructions
Installation
• This device is equipped with a three-wire grounding-type plug. This is a
safety feature. If you are unable to insert the plug into the outlet, contact
an electrician to replace your outlet with one that will accept this type of
plug. Do not attempt to defeat the purpose of the grounding-type plug.
Always follow your local/national wiring codes.
• W
arning! There is a risk of explosion if the batter
y is replaced with
an incorrect battery type. Do not attempt to ser
vice the device
yourself. R
efer all servicing to qualified ser
vice personnel.
Note:
Before proceeding with installation, make sure all devices being connected to
the KVM switch are turned off.
1.
Using audio/video cables appropriate for your switch model, connect the
video output port of each computer you are adding to the video input
ports of the KVM Switch.
Note:
Models with Dual Monitor capability require two available video ports per
computer.
2.
Using USB A/B device cables, connect a USB port on each computer
being added to the USB input ports of the KVM Switch.
Note:
Models with CAC (Common Access Card) support require an additional USB
2.0 A/B cable connected to each computer.
3.
Using 3.5 mm stereo audio cables, connect the audio output of each
computer you are adding to the audio input ports of the KVM Switch.
4.
Using the appropriate audio/video cable, connect a monitor appropriate
for your switch model to the console video output port of the KVM
switch.
18-06-260-933845-EN.indd 8
8/10/2018 2:43:53 PM
9
Installation
5.
Connect a wired USB keyboard and mouse to the console USB keyboard
and mouse ports of the KVM switch.
Note:
Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported.
6.
Connect a set of speakers to the console audio output port of the KVM
Switch using a 3.5 mm stereo audio cable.
Note:
Microphones or headsets with microphones are not supported.
7.
For models with CAC support, connect a CAC reader to the console CAC
port of the KVM switch.
Note:
CAC readers with external power sources are not supported.
8.
Power on the KVM by connecting the included external power supply
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
9.
Power on all connected computers and monitor. The Front Panel LEDs
will begin to flash.
Note:
The computer connected to port 1 will always be selected by default after
power up.
10.
To switch among the connected computers, simply push the desired
input button on the front-panel of the KVM. If an input port is selected,
the LED of that port will turn on.
18-06-260-933845-EN.indd 9
8/10/2018 2:43:53 PM
16
EDID Learn
8.
Once downloaded, run the Administration and Security Management
Tool executable file. The Administration and Security Management
screen will appear.
9.
Initiate the session by pressing the following hotkey command, one key
one after another.
[Alt][Alt][c][n][f][g]
10.
Upon completing the command, the mouse connected to the KVM will
stop functioning. A prompt will appear to enter the Credential ID.
11.
Log in by entering the default username
admin
and pressing Enter.
12.
Enter the default password
12345
and press Enter.
13.
Seven options will appear in a numerical menu. Select option 6 and
press Enter.
14.
A menu will appear prompting you to Select Mode. Type
local
and
press Enter. The Administration and Security Management Tool will
automatically learn and store the display’s EDID. The device will then
reset and reboot. At the end of the boot-up, ensure all connected
computers are properly displaying video on the connected monitor.
18-06-260-933845-EN.indd 16
8/10/2018 2:43:54 PM
8
Important Safety Instructions
Installation
• This device is equipped with a three-wire grounding-type plug. This is a
safety feature. If you are unable to insert the plug into the outlet, contact
an electrician to replace your outlet with one that will accept this type of
plug. Do not attempt to defeat the purpose of the grounding-type plug.
Always follow your local/national wiring codes.
• W
arning! There is a risk of explosion if the batter
y is replaced with
an incorrect battery type. Do not attempt to ser
vice the device
yourself. R
efer all servicing to qualified ser
vice personnel.
Note:
Before proceeding with installation, make sure all devices being connected to
the KVM switch are turned off.
1.
Using audio/video cables appropriate for your switch model, connect the
video output port of each computer you are adding to the video input
ports of the KVM Switch.
Note:
Models with Dual Monitor capability require two available video ports per
computer.
2.
Using USB A/B device cables, connect a USB port on each computer
being added to the USB input ports of the KVM Switch.
Note:
Models with CAC (Common Access Card) support require an additional USB
2.0 A/B cable connected to each computer.
3.
Using 3.5 mm stereo audio cables, connect the audio output of each
computer you are adding to the audio input ports of the KVM Switch.
4.
Using the appropriate audio/video cable, connect a monitor appropriate
for your switch model to the console video output port of the KVM
switch.
18-06-260-933845-EN.indd 8
8/10/2018 2:43:53 PM
9
Installation
5.
Connect a wired USB keyboard and mouse to the console USB keyboard
and mouse ports of the KVM switch.
Note:
Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported.
6.
Connect a set of speakers to the console audio output port of the KVM
Switch using a 3.5 mm stereo audio cable.
Note:
Microphones or headsets with microphones are not supported.
7.
For models with CAC support, connect a CAC reader to the console CAC
port of the KVM switch.
Note:
CAC readers with external power sources are not supported.
8.
Power on the KVM by connecting the included external power supply
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
9.
Power on all connected computers and monitor. The Front Panel LEDs
will begin to flash.
Note:
The computer connected to port 1 will always be selected by default after
power up.
10.
To switch among the connected computers, simply push the desired
input button on the front-panel of the KVM. If an input port is selected,
the LED of that port will turn on.
18-06-260-933845-EN.indd 9
8/10/2018 2:43:53 PM
16
EDID Learn
8.
Once downloaded, run the Administration and Security Management
Tool executable file. The Administration and Security Management
screen will appear.
9.
Initiate the session by pressing the following hotkey command, one key
one after another.
[Alt][Alt][c][n][f][g]
10.
Upon completing the command, the mouse connected to the KVM will
stop functioning. A prompt will appear to enter the Credential ID.
11.
Log in by entering the default username
admin
and pressing Enter.
12.
Enter the default password
12345
and press Enter.
13.
Seven options will appear in a numerical menu. Select option 6 and
press Enter.
14.
A menu will appear prompting you to Select Mode. Type
local
and
press Enter. The Administration and Security Management Tool will
automatically learn and store the display’s EDID. The device will then
reset and reboot. At the end of the boot-up, ensure all connected
computers are properly displaying video on the connected monitor.
18-06-260-933845-EN.indd 16
8/10/2018 2:43:54 PM
8
Important Safety Instructions
Installation
• This device is equipped with a three-wire grounding-type plug. This is a
safety feature. If you are unable to insert the plug into the outlet, contact
an electrician to replace your outlet with one that will accept this type of
plug. Do not attempt to defeat the purpose of the grounding-type plug.
Always follow your local/national wiring codes.
• W
arning! There is a risk of explosion if the batter
y is replaced with
an incorrect battery type. Do not attempt to ser
vice the device
yourself. R
efer all servicing to qualified ser
vice personnel.
Note:
Before proceeding with installation, make sure all devices being connected to
the KVM switch are turned off.
1.
Using audio/video cables appropriate for your switch model, connect the
video output port of each computer you are adding to the video input
ports of the KVM Switch.
Note:
Models with Dual Monitor capability require two available video ports per
computer.
2.
Using USB A/B device cables, connect a USB port on each computer
being added to the USB input ports of the KVM Switch.
Note:
Models with CAC (Common Access Card) support require an additional USB
2.0 A/B cable connected to each computer.
3.
Using 3.5 mm stereo audio cables, connect the audio output of each
computer you are adding to the audio input ports of the KVM Switch.
4.
Using the appropriate audio/video cable, connect a monitor appropriate
for your switch model to the console video output port of the KVM
switch.
18-06-260-933845-EN.indd 8
8/10/2018 2:43:53 PM
5.
Connect a wired USB keyboard and mouse to the console USB keyboard
and mouse ports of the KVM Switch.
Note:
Keyboards and mice with internal USB hub or composite device functions
are not supported. Wireless keyboards and mice are not supported.
6.
Connect a set of speakers to the console audio output port of the KVM
Switch using a 3.5 mm stereo audio cable.
Note:
Microphones or headsets with microphones are not supported.
7.
Power on the KVM by connecting the included external power supply
and plugging it into a Tripp Lite Surge Protector, Power Distribution Unit
(PDU), or Uninterruptible Power Supply (UPS).
8.
Power on all connected computers and monitor. The Front Panel LEDs
will begin to flash.
Note:
The computer connected to port 1 will always be selected by default after
power up.
9.
To switch among the connected computers, simply push the desired
input button on the front-panel of the KVM. If an input port is selected,
the LED of that port will turn on.
Note:
The KVM will terminate an open session upon switching to a different
computer.
