11
KM Switching
4.
The below illustration shows how this functionality works:
Cursor
Auto-switch
from 4 to 1
Auto-switch
from 1 to 2
Auto-switch
from 2 to 3
Auto-switch
from 3 to 4
Monitor 4
Monitor 3
Monitor 2
Monitor 1
Note:
Cursor control of selected channels can only be used in Single-Head Display
Mode.
Multi-Head Mode KM Switching
When using computers with multiple displays, cursor control of selected
channels will no longer auto-switch from monitor to monitor. Cursor control
of selected channels will now consist of pressing the scroll wheel twice and
moving the mouse in the direction of the channel you desire to switch to.
Note:
Multi-Head Display Mode switching must be used if any of the four computers
have multiple displays.
The installation setup must match one of the B002-Series pre-defined
display topology configurations. The B002-Series Secure KVM Switches
have configurable display topologies that can be easily selected through
keyboard hotkey commands.
18-06-260-933845-EN.indd 11
8/10/2018 2:43:54 PM
14
KVM LEDs
Port Selection LEDs
• When the LED is off, the corresponding port is not currently selected.
• When the LED is on, the corresponding port is currently selected.
• When the LED is flashing, the EDID Learn process is occurring.
Push-Button LEDs
• When the push-button LED of a non-selected port is off, the
corresponding port is not currently selected.
• When the push-button LED of the selected port is off, CAC functionality
has been disabled for the corresponding port.
• When the push-button LED is on, the corresponding port is currently
selected and CAC functionality is enabled.
• When the push-button LED is flashing, the EDID Learn process is
occurring.
Port Selection and Push-Button LEDs
• When all Port Selection and Push-Button LEDs are flashing
simultaneously, the USB peripheral connected to the console keyboard or
mouse port has been rejected.
Console Video Port LED
• When the LED is off, a monitor is not connected
• When the LED is illuminated, a monitor is connected
• When the LED is flashing, there is a problem with EDID. Perform the EDID
Learn procedure (see the
EDID Learn
section for details) to resolve the
issue.
Console CAC Port LED
• When the LED is off, a CAC device is not connected.
• When the LED is on, an authorized and functional CAC device is
connected.
• When the LED is flashing, a non-CAC peripheral is connected.
18-06-260-933845-EN.indd 14
8/10/2018 2:43:54 PM
10
KM Switching
Note:
KM switching is not applicable to KVM models with only one video console port.
After connecting all devices to your B002-Series Secure KVM Switch, a
display mode and display topology configuration must be selected. By
default, the B002-Series Secure KVM Switches are configured to Single-
Head Display Mode and a topology with four screens arranged horizontally,
starting with Port 1.
Note:
If one or more of the input computers have multiple displays, Multi-Head Display
Mode must be selected. Otherwise, select Single-Head Display Mode.
The table below shows Display Mode keyboard hotkey commands:
Commands
Hotkeys
Single-Head Sisplay Mode
CTRL+CTRL+K+S
Multi-Head Display Mode
CTRL+CTRL+K+M
Single-Head Mode KM Switching
In addition to traditional channel switching by buttons located on the front
panel, KM also supports cursor control of selected channels. This technology
allows seamless switching between computers by moving the mouse cursor
from one display to another. Users can effortlessly switch computers for
faster productivity.
1.
KM functionality for KVM devices is only available once the device has
been put into KM mode, refer to admin tool guide for detail.
2.
When the device is placed into KM mode, it will behave identically to the
KM models of the product.
3.
The major difference when the device is placed into KM mode is that
cursor control of selected channels is available as an additional method
to switch the connected computer.
18-06-260-933845-EN.indd 10
8/10/2018 2:43:53 PM
10
11
KM Switching
4.
The below illustration shows how this functionality works:
Cursor
Auto-switch
from 4 to 1
Auto-switch
from 1 to 2
Auto-switch
from 2 to 3
Auto-switch
from 3 to 4
Monitor 4
Monitor 3
Monitor 2
Monitor 1
Note:
Cursor control of selected channels can only be used in Single-Head Display
Mode.
Multi-Head Mode KM Switching
When using computers with multiple displays, cursor control of selected
channels will no longer auto-switch from monitor to monitor. Cursor control
of selected channels will now consist of pressing the scroll wheel twice and
moving the mouse in the direction of the channel you desire to switch to.
Note:
Multi-Head Display Mode switching must be used if any of the four computers
have multiple displays.
The installation setup must match one of the B002-Series pre-defined
display topology configurations. The B002-Series Secure KVM Switches
have configurable display topologies that can be easily selected through
keyboard hotkey commands.
18-06-260-933845-EN.indd 11
8/10/2018 2:43:54 PM
14
KVM LEDs
Port Selection LEDs
• When the LED is off, the corresponding port is not currently selected.
• When the LED is on, the corresponding port is currently selected.
• When the LED is flashing, the EDID Learn process is occurring.
Push-Button LEDs
• When the push-button LED of a non-selected port is off, the
corresponding port is not currently selected.
• When the push-button LED of the selected port is off, CAC functionality
has been disabled for the corresponding port.
• When the push-button LED is on, the corresponding port is currently
selected and CAC functionality is enabled.
• When the push-button LED is flashing, the EDID Learn process is
occurring.
Port Selection and Push-Button LEDs
• When all Port Selection and Push-Button LEDs are flashing
simultaneously, the USB peripheral connected to the console keyboard or
mouse port has been rejected.
Console Video Port LED
• When the LED is off, a monitor is not connected
• When the LED is illuminated, a monitor is connected
• When the LED is flashing, there is a problem with EDID. Perform the EDID
Learn procedure (see the
EDID Learn
section for details) to resolve the
issue.
Console CAC Port LED
• When the LED is off, a CAC device is not connected.
• When the LED is on, an authorized and functional CAC device is
connected.
• When the LED is flashing, a non-CAC peripheral is connected.
18-06-260-933845-EN.indd 14
8/10/2018 2:43:54 PM
10
KM Switching
Note:
KM switching is not applicable to KVM models with only one video console port.
After connecting all devices to your B002-Series Secure KVM Switch, a
display mode and display topology configuration must be selected. By
default, the B002-Series Secure KVM Switches are configured to Single-
Head Display Mode and a topology with four screens arranged horizontally,
starting with Port 1.
Note:
If one or more of the input computers have multiple displays, Multi-Head Display
Mode must be selected. Otherwise, select Single-Head Display Mode.
The table below shows Display Mode keyboard hotkey commands:
Commands
Hotkeys
Single-Head Sisplay Mode
CTRL+CTRL+K+S
Multi-Head Display Mode
CTRL+CTRL+K+M
Single-Head Mode KM Switching
In addition to traditional channel switching by buttons located on the front
panel, KM also supports cursor control of selected channels. This technology
allows seamless switching between computers by moving the mouse cursor
from one display to another. Users can effortlessly switch computers for
faster productivity.
1.
KM functionality for KVM devices is only available once the device has
been put into KM mode, refer to admin tool guide for detail.
2.
When the device is placed into KM mode, it will behave identically to the
KM models of the product.
3.
The major difference when the device is placed into KM mode is that
cursor control of selected channels is available as an additional method
to switch the connected computer.
18-06-260-933845-EN.indd 10
8/10/2018 2:43:53 PM
11
KM Switching
4.
The below illustration shows how this functionality works:
Cursor
Auto-switch
from 4 to 1
Auto-switch
from 1 to 2
Auto-switch
from 2 to 3
Auto-switch
from 3 to 4
Monitor 4
Monitor 3
Monitor 2
Monitor 1
Note:
Cursor control of selected channels can only be used in Single-Head Display
Mode.
Multi-Head Mode KM Switching
When using computers with multiple displays, cursor control of selected
channels will no longer auto-switch from monitor to monitor. Cursor control
of selected channels will now consist of pressing the scroll wheel twice and
moving the mouse in the direction of the channel you desire to switch to.
Note:
Multi-Head Display Mode switching must be used if any of the four computers
have multiple displays.
The installation setup must match one of the B002-Series pre-defined
display topology configurations. The B002-Series Secure KVM Switches
have configurable display topologies that can be easily selected through
keyboard hotkey commands.
18-06-260-933845-EN.indd 11
8/10/2018 2:43:54 PM
14
KVM LEDs
Port Selection LEDs
• When the LED is off, the corresponding port is not currently selected.
• When the LED is on, the corresponding port is currently selected.
• When the LED is flashing, the EDID Learn process is occurring.
Push-Button LEDs
• When the push-button LED of a non-selected port is off, the
corresponding port is not currently selected.
• When the push-button LED of the selected port is off, CAC functionality
has been disabled for the corresponding port.
• When the push-button LED is on, the corresponding port is currently
selected and CAC functionality is enabled.
• When the push-button LED is flashing, the EDID Learn process is
occurring.
Port Selection and Push-Button LEDs
• When all Port Selection and Push-Button LEDs are flashing
simultaneously, the USB peripheral connected to the console keyboard or
mouse port has been rejected.
Console Video Port LED
• When the LED is off, a monitor is not connected
• When the LED is illuminated, a monitor is connected
• When the LED is flashing, there is a problem with EDID. Perform the EDID
Learn procedure (see the
EDID Learn
section for details) to resolve the
issue.
Console CAC Port LED
• When the LED is off, a CAC device is not connected.
• When the LED is on, an authorized and functional CAC device is
connected.
• When the LED is flashing, a non-CAC peripheral is connected.
18-06-260-933845-EN.indd 14
8/10/2018 2:43:54 PM
10
KM Switching
Note:
KM switching is not applicable to KVM models with only one video console port.
After connecting all devices to your B002-Series Secure KVM Switch, a
display mode and display topology configuration must be selected. By
default, the B002-Series Secure KVM Switches are configured to Single-
Head Display Mode and a topology with four screens arranged horizontally,
starting with Port 1.
Note:
If one or more of the input computers have multiple displays, Multi-Head Display
Mode must be selected. Otherwise, select Single-Head Display Mode.
The table below shows Display Mode keyboard hotkey commands:
Commands
Hotkeys
Single-Head Sisplay Mode
CTRL+CTRL+K+S
Multi-Head Display Mode
CTRL+CTRL+K+M
Single-Head Mode KM Switching
In addition to traditional channel switching by buttons located on the front
panel, KM also supports cursor control of selected channels. This technology
allows seamless switching between computers by moving the mouse cursor
from one display to another. Users can effortlessly switch computers for
faster productivity.
1.
KM functionality for KVM devices is only available once the device has
been put into KM mode, refer to admin tool guide for detail.
2.
When the device is placed into KM mode, it will behave identically to the
KM models of the product.
3.
The major difference when the device is placed into KM mode is that
cursor control of selected channels is available as an additional method
to switch the connected computer.
18-06-260-933845-EN.indd 10
8/10/2018 2:43:53 PM
11
KM Switching
4.
The below illustration shows how this functionality works:
Cursor
Auto-switch
from 4 to 1
Auto-switch
from 1 to 2
Auto-switch
from 2 to 3
Auto-switch
from 3 to 4
Monitor 4
Monitor 3
Monitor 2
Monitor 1
Note:
Cursor control of selected channels can only be used in Single-Head Display
Mode.
Multi-Head Mode KM Switching
When using computers with multiple displays, cursor control of selected
channels will no longer auto-switch from monitor to monitor. Cursor control
of selected channels will now consist of pressing the scroll wheel twice and
moving the mouse in the direction of the channel you desire to switch to.
Note:
Multi-Head Display Mode switching must be used if any of the four computers
have multiple displays.
The installation setup must match one of the B002-Series pre-defined
display topology configurations. The B002-Series Secure KVM Switches
have configurable display topologies that can be easily selected through
keyboard hotkey commands.
18-06-260-933845-EN.indd 11
8/10/2018 2:43:54 PM
14
KVM LEDs
Port Selection LEDs
• When the LED is off, the corresponding port is not currently selected.
• When the LED is on, the corresponding port is currently selected.
• When the LED is flashing, the EDID Learn process is occurring.
Push-Button LEDs
• When the push-button LED of a non-selected port is off, the
corresponding port is not currently selected.
• When the push-button LED of the selected port is off, CAC functionality
has been disabled for the corresponding port.
• When the push-button LED is on, the corresponding port is currently
selected and CAC functionality is enabled.
• When the push-button LED is flashing, the EDID Learn process is
occurring.
Port Selection and Push-Button LEDs
• When all Port Selection and Push-Button LEDs are flashing
simultaneously, the USB peripheral connected to the console keyboard or
mouse port has been rejected.
Console Video Port LED
• When the LED is off, a monitor is not connected
• When the LED is illuminated, a monitor is connected
• When the LED is flashing, there is a problem with EDID. Perform the EDID
Learn procedure (see the
EDID Learn
section for details) to resolve the
issue.
Console CAC Port LED
• When the LED is off, a CAC device is not connected.
• When the LED is on, an authorized and functional CAC device is
connected.
• When the LED is flashing, a non-CAC peripheral is connected.
18-06-260-933845-EN.indd 14
8/10/2018 2:43:54 PM
10
KM Switching
Note:
KM switching is not applicable to KVM models with only one video console port.
After connecting all devices to your B002-Series Secure KVM Switch, a
display mode and display topology configuration must be selected. By
default, the B002-Series Secure KVM Switches are configured to Single-
Head Display Mode and a topology with four screens arranged horizontally,
starting with Port 1.
Note:
If one or more of the input computers have multiple displays, Multi-Head Display
Mode must be selected. Otherwise, select Single-Head Display Mode.
The table below shows Display Mode keyboard hotkey commands:
Commands
Hotkeys
Single-Head Sisplay Mode
CTRL+CTRL+K+S
Multi-Head Display Mode
CTRL+CTRL+K+M
Single-Head Mode KM Switching
In addition to traditional channel switching by buttons located on the front
panel, KM also supports cursor control of selected channels. This technology
allows seamless switching between computers by moving the mouse cursor
from one display to another. Users can effortlessly switch computers for
faster productivity.
1.
KM functionality for KVM devices is only available once the device has
been put into KM mode, refer to admin tool guide for detail.
2.
When the device is placed into KM mode, it will behave identically to the
KM models of the product.
3.
The major difference when the device is placed into KM mode is that
cursor control of selected channels is available as an additional method
to switch the connected computer.
18-06-260-933845-EN.indd 10
8/10/2018 2:43:53 PM
When the LED is flashing, there is a problem with EDID. Reseat the power
of the KVM to resolve these issues.
10
