Description and Button Functions
1. LCD Description
Auto power off (does not apply
when recording), the meter will
automatically shuts off after
5mins without any button
presses.
REC
:
Recording status. After the
record mode is set up by the
software, press the
START/STOP button for more
than 4 seconds to begin
recording. This icon will be
displayed
and indicates the meter is recording data. Press the same
button again for more than 4 seconds to stop recording.
Record until full is selected. When the memory is full, the
datalogger will stop recording.
Continuous recording is selected. When the memory is full,
the data will overwrite the oldest data.
FULL
Memory full and recording has stopped.
Battery status, when completely filled in (black) the battery
power is full. When there is only one section filled in, the
battery is exhausted and should be replaced with a new
one.
