Battery Replacement
WARNINGS:
To avoid electric shock, remove the
test leads from
the meter before removing the battery/fuse
cover.
1. Lift up the tilt stand.
2. Loosen the Phillips
screw(s) on the battery/fuse
cover.
3. Remove the battery/fuse cover.
4. Replace the batteries with four
AAA batteries.
5. Observe polarity as shown
inside battery compartment.
6. Install the battery/fuse cover
and tighten the screw(s).
WARNING:
To avoid electric shock, do not
operate the meter
until the battery/fuse cover is
securely fastened to the meter.
WARNING:
When replacing the battery or fuses, be sure to
secure
the battery compartment door firmly to maintain the waterproof
and dust proof integrity of the meter. Loose or overtightened screws, or
an improperly seated o-ring may compromise the meter's water and
dust ingress protection.
www.
.com
1.800.561.8187
