1. Set the rotary function switch to the Low Z position.
2. Press the MODE button to select AC or DC voltage.
The AC “~” or DC “” symbol will appear on the LCD display.
3. Insert the black test lead into the COM input jack and the
red test lead into the V input jack.
4. Touch the test leads to the circuit under test. If measuring
DC voltage, touch the red test lead to the positive side of the
circuit and the black test lead to the negative side of the
circuit.
5. Read the voltage on the LCD display.
AC/DC Current Measurements
1.
Insert the black test lead into the negative COM input jack.
2. For current measurements up to 10A,set the rotary
function switch to the
10A
position and insert the red
test lead into the
10A
input jack
3. For current measurements up to 600mA, set the rotary
function switch to the
mA
position and insert the red test
lead into the
uA/mA
input jack.
WARNING:
Observe all safety precautions
when working on live circuits. Do not
measure current on circuits that exceed
1000V. Measurements in the 10A range
should be limited to 30 seconds maximum
every 15 minutes
www.
.com
1.800.561.8187
