14
Triple Solar assembly instruction PVT heat pump panels UK January 2021
The TS clamping profile is only later on pushed into the panel profile. Until then, the TS clamping
profile lies loose at some distance from the panel profile.
Mounting of the panels
1. Insert the TS anti-slip bolt into a hole in the end profile on each side of the heat pump
panel to prevent it from slipping. See figure 7.2-a.
Figure 7.2-a panel with M8 bolt to prevent slipping.
2. Lay down the outer heat pump panel on the TS clamping profile and align.
3. Secure the outside of the panel with the TS end clamp and socket head screw M8x40,
see figure 7.2-b
Figure 7.1-d the TS clamping profile lies loose, until the panels are permanently fixed.
Figure 7.2-b panel with end clamp mounted.
