8
2.4 Configure your Network
If you are not using a wired connection, then the screen below will appear to
enable you to connect your unit via Wifi. Highlight the Wifi connection and use
the OK button on the remote to see the option to switch Wifi to ON.
The unit will then scan for available networks and display them in a list.
Choose your correct network name, then press OK on the remote to enter your
network Key.
Note: You can access these settings any time after setup by going to the
Android settings Icon which can be found under the PROGRAMS heading in
your TV menu.
Once the status shows as ‘Connected’ the setup process will continue
automatically. The unit will begin updating available Apps and then launch the
App Installer as shown on the following page.
This may take a few minutes to complete.
9
2.4.1 Using the App Installer
Once your unit has finished updating, the App Installer screen will appear.
Here, you can choose the content you would like to install on your unit. Simply
browse the sections, select the App you require and press OK on the remote
to install it.
Note: You can launch the App installer at any time again from the
Icon in the PROGRAMS section ro reinstall any App required.
Once you have finished your selections, simply press return on your remote,
and then choose if you would like to setup your shortcut icons on your
Homescreen. You will then see the options below: Here, you can choose
which App to display in which slot, then press return when done.
