triOS TriBox3, Руководство по эксплуатации

Страница: 6 / 88

4 D01-051en202111 Manual TriBox3
Use
Advanced
Use
Malfunction & Maintenance
Commis-
sioning
Introduction
FA
Q
Technical Data
W
arranty
Customer
Service
Contact
Keyword
Index
Accessories
General
Information
General Information // TriBox3
1.3 Warnings
• Make sure never to put damaged products into operation. After receiving the package, examine the de -
vice for any damage due to transport.
• Read the operating instructions carefully before beginning any installation or maintenance work.
• Make sure that the mains power cable is not damaged. Make sure that no heavy objects are placed on
the mains power cable and that the cable is not kinked. Make sure that the mains power cable is not run
near hot surfaces.
• If the cable is damaged, it must be replaced with an original part by the customer service of TriOS Mess-
und Datentechnik GmbH.
• Stop operation of the sensor in the event of excessive heat development (i.e. if it is hot to the touch).
Switch off the controller immediately and unplug the mains power cable from the power supply. Please
contact your dealer or the TriOS customer service.
• Never try to disassemble or modify a part of the controller if such a procedure is not explicitly described in
this manual. Inspections, modifications and repairs may only be carried out by the dealer or by qualified
experts authorized by TriOS.
• Devices from TriOS Mess- und Datentechnik GmbH meet the highest safety standards. Repairs to the
device must be carried out by TriOS Mess- und Datentechnik GmbH or by a workshop authorized by
TriOS. Faulty, improper repairs can result in accidents and injuries.
1.4 User and Operating Requirements
The TriBox3 has been developed for use in industry and science. The target group for the operation of the
controller is technically skilled staff in plants, sewage treatment plants, water plants and institutes. We assume
that the personnel are sufficiently qualified for operation and installation based on their professional training and
experience. The personnel must be able to correctly understand and implement the safety labels and informa-
tion on the packaging and in the package inserts.
1.5 Intended Use
The TriBox3 is intended to control supported sensors and collect, process and store measurement data. Its use
is described in this manual. Please note the technical data of the controller. Any other use is not considered to
be in compliance with the intended use.
According to current scientific knowledge, the device is safe to use when it is handled according to the instruc -
tions in this user manual.
TriOS does not guarantee the plausibility of the measured values. The user
is always responsible for the monitoring and interpretation of the measured
values.
DANGER