6
lCd diSplay
The IP address and subnet mask of the MC508 is shown on the LCD display for a few seconds after power-up. The factory default
IP address is 192.168.0.250. This can be changed using the ETHERNET or the
IP _ ADDRESS
command via
Motion
Perfect.
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ENABLE
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Display at start-up
Display with WDOG on
0
good quality screened cables should be used for the serial ports. the serial ports and Canbus port are not
galvanically isolated, therefore the 0V return MUSt be connected to all peripheral devices. in addition, bond
together the 0V (24V return) terminals of all system components so as to minimise current flowing in the serial
cables.
