1
3
2
4
Trimline 38 FS
Installation instruction
4
Cut-out plate
NOTE
Only the lower cover needs to be removed for installation
and gas connection.
Remove covers
Remove the upper and lower covers from the mantle.
1
These are attached with 4 hooks per cover. Slide the cover
upwards first and then pull the lower part outwards. Both the
upper and lower covers can be removed. These are attached
with 4 hooks per cover.
Use the swivel legs to ensure the fireplace is level. Adjust
the height between the mantle and the floor to 20 mm.
2
Connection to the gas pipes
3
The cut-out panel at the rear can be used to feed
the gas pipe in.
4
The concentric pathway can then be put in place, see
Chapter
7 Concentric pathways
and
8 Concentric flue system.
20 mm
Gas connection
Mounting location for
optional WiFi box
