Trimline Opal
Installation instruction
26
Function
Possible cause
Solution
7. Pilot light goes out when the
appliance is closed
False air along pilot flame holder/gasket
Check pilot flame holder and gasket for leaks
False air hatches
Check pressure hatches/gasket is completely
closed
Main flame causes pilot flame to go out
Check restrictor/baffle in accordance with
regulations
8. Pilot light/main flame off
Gas pre-pressure has dropped
Check correct dimensions of gas pipe or blockage,
correct
Main burner ignition, 3 beeps, low
mains adapter voltage
Check batteries or 6-VDC adapter
Too much/little transport in appliance/outlet
Check restrictor/baffle situation in accordance with
instructions.
Concentric outlet pathway incorrect
Check outlet pathway in accordance with
instructions
Recirculation, façade/roof mouth position incorrect Check outlet in accordance with instructions
Recirculation in closed outlet system
Check outlet connections
9. Main burner does not start up
Gas control valve knob to MAN
Check gas control valve knob to ON
10. Delayed ignition of main burner
Pilot light burner blocked
Check logs, pebbles, etc. are in the right position.
pilot flame should be free of obstructions.
Small/lazy pilot flame
Check and correct pressure and physical state of
pilot flame burner
Close main burner flame openings
Check and clean with a vacuum cleaner or
similar device.
Logs, etc. in wrong position
Check and correct, see instructions
11. Low main flame
Gas supply pressure too low
Check gas supply pressure and corrections
Burner pressure too low
Check burner pressure, check instructions for
correct values
12. No or little difference between
high/low settings for main flame
Low position setting incorrect
Check and adjust low position in accordance with
instructions
13. DB burner does not work
Defective step valve
Check whether clicking sound is perceptible, press
button on remote control several times, replace
valve if necessary
14. Sooty flame
Insufficient transport in appliance/closed drainage
system
Check restrictor/baffle, follow instructions for
correct value
Check outlet system pathway in accordance
with instructions
Check outlet in accordance with regulations/
instructions
Excessive feed/burner pressure
Check and correct gas supply/burner pressure
in accordance with instructions
Blocked burner flame openings
Check and clean with a vacuum cleaner,
for example
Incorrect premix for main burners
Check and correct, see instructions
Decorative logs, etc. in incorrect position
Check and correct, see instructions
