3
ANLEITUNG 04_21
PRELIMINARY REMARKS
Thank you for choosing TRIMAX PV modules. This manual provides you with information to ensure that your
PV system generates optimal yields over its entire life cycle. This manual is intended for professionals
involved in the design, installation and commissioning of photovoltaic systems.
TRIMAX Solar produces high quality and reliable photovoltaic modules according to international standards
(ISO 9001 : 2015, ISO 14001 : 2015, ISO 45001 : 2018). TRIMAX Solar HALF-CUT PERC modules are certified
according to IEC 61730 and IEC 61215 and have also undergone salt spray and ammonia corrosion testing.
The 100% PID-free solar cells reliably provide stable yields throughout the warranty period and beyond.
Before installing the solar system, check with your local authorities and utility companies for applicable
guidelines and approval requirements.
Observe all necessary safety regulations during design and installation. This is the responsibility of the
installer of the system.
Keep the manual for the entire service life of the solar modules and ensure that this manual is accessible to
the operator at all times.
Pass the manual on to any subsequent owner or user of the solar modules.
We reserve the right to make changes to the product, specifications or instructions without prior notice.
Failure to do so may result in serious injury and damage and/or void the limited warranty and
guarantee.
PACKAGING
•
Do not exceed the maximum stacking capacity of 2 pallets (standard packaging for shipping).
•
Place the pallets only on firm and horizontal levels to prevent them from toppling over.
•
Upon receipt, look for visible damage to the packaging and the product itself.
•
Check the order information and the product nameplate to ensure that the products match the type
ordered.
•
If you notice any problems, contact the shipping company and/or your supplier as soon as possible
before you start installing the product.
•
Store the pallets in a ventilated, dry place until installation.
•
Do not stack individual modules without protection to avoid scratching the glass and frame.
•
Do not unpack the pallets in rain or snow.
•
Do not pull the module out of the packaging by the cables or junction box.
•
Removal of the modules from the packaging must be done by two people.
•
Use a stand for removal to avoid damage caused by falling over.