TriMark 24324-02, Руководство по установке

Страница: 8 / 32

Doorbell e-
PAD
Operation and Features
Access code:
Authority code:
Locking Doors With Keypad
Press and hold down the (1) button for 1-2 seconds. An
Access Code
is not needed to lock the doors.
Door Bell Operation
The doorbell button sends a CAN message to the RF Controller
instantly when pressed. An
Access Code
is not necessary for the
doorbell.
Secure Operations
Entering a valid 5-digit
Access Code
provides a double-beep and
enables a secure operation. After entering an
Access Code
, the keypad
is enabled for 5 seconds and the next button pressed initiates a secure
operation, such as unlocking the doors.
Note:

The
Authority Code
does not allow for secure operations. It is
only used to assign access codes (see page 12 for information on
setting access codes).

If an unassigned button is pressed, or no button is pressed, within
5 seconds of a correctly entered
Access Code
, the keypad
reverts back to disabled state.

If the keypad does not Double-beep after the 5th digit of your
entered
Access Code
, then you have not entered the correct
Access Code
.

The secure keypad operations are set depending on the system
configuration. See the next page for more information.
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1 2 3 4 4
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
4 4 4 4 4
5