TriMark 24324-02, Руководство по установке

Страница: 17 / 32

14
My New Authority Code
Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
The following area can be used to document the new
Authority Code
:
Notes:

While in “Learn Mode,” each button push provides a double-
chirp and the backlight flashes.


The authority code is to be controlled by individuals (owners of
vehicle, fleet manager, etc.) who manage the distribution of
access codes to vehicle users.

The authority code should be changed when the vehicle is
sold.

The authority code does not enable secure functions (lock/
unlock doors, etc.)—it is only used to assign access codes.

Doorbell systems only allow codes using buttons 1-4 and
provides memory for 4 unique access codes.

The keypad automatically leaves “Learn Mode” when the new
code is set.
Assign New Access Codes
The
Access Codes
are used for secure functions, such as unlocking
doors. The
Access Codes
must be EXACTLY 5 digits long. With a
valid
Authority Code
, a new
Access Code
can be programmed with
the following instructions.
Programming:
1. Press the (5 / 6) or (3) button for 5 seconds until the keypad
beeps. The backlighting of the keypad will flash indicating the
keypad is in “Learn Mode.”
2. Enter the 5-digit
Authority Code
(see page 4 for the code).

If you enter an INCORRECT
Authority Code
, the keypad
will beep for 1 second, and leave “Learn Mode.”

If you enter a CORRECT
Authority Cod
e, the keypad will
provide a constant beep that will only stop after you have
defined a
memory bank to store the new
Access Code
.