TriMark 22272-03, Руководство по установке

Страница: 7 / 28

4
Lock Doors With Keypad
Press and hold down the (1 / 2) or (1) button for 1-2 seconds. An
access code is not needed to lock the doors.
Secure Operations
Entering a valid 5-digit access code enables secure operations. After
entering an access code, the keypad is enabled for 5 seconds and a
6th button press initiates a secure operation, such as unlocking the
doors.
Notes:
•
The authority code does not allow for secure operations. It is
only used to assign access codes (see page 15 for information
on setting access codes).
•
If an unassigned button or no button is pressed while the
system is enabled, the keypad reverts back to disabled state.
•
The secure keypad operations are set depending on the
system configuration.
Doorbell
Press and release the doorbell button on a doorbell keypad. The
doorbell does not require an access code. When the I/O module sees
a doorbell command from the keypad, an output pulse is provided from
zone 6.