TriMark 22272-03, Руководство по установке

Страница: 8 / 28

e- ASK Configuration — Non-doorbell
The following operations are dependent on system configuration.
Entering a 5-digit access code enables the keypad. After entering the
access code, one must press a 6th digit to unlock specific doors or
perform an operation according to the following listing.
Configuration A [SW 1 off / SW 2 off]:
•
Button (1 / 2): Unassigned
•
Button (3 / 4): Unlocks all entry and compartment doors
•
Button (5 / 6): Unassigned
•
Button (7 / 8): Toggles Aux 1 output
•
Button (9 / 0): Activates zone 6 unidirectional actuation
Configuration B [SW 1 off / SW 2 on]:
•
Button (1 / 2): Unlocks all entry door(s)
•
Button (3 / 4): Unlocks all entry and compartment doors
•
Button (5 / 6): Unassigned
•
Button (7 / 8): Toggles Aux 1 output
•
Button (9 / 0): Activates zone 6 unidirectional actuation
Configuration C [SW 1 on / SW 2 off]:
•
Button (1 / 2): Unlocks all entry doors
•
Button (3 / 4): Unlocks all doors assigned to relay bank A
•
Button (5 / 6): Unlocks all doors assigned to relay bank B
•
Button (7 / 8): Unlocks all doors assigned to relay bank C
•
Button (9 / 0): Unlocks all doors assigned to relay bank D
Configuration D [SW 1 on / SW 2 on]:
•
Button (1 / 2): Unlocks all entry doors
•
Button (3 / 4): Unlocks all entry and compartment doors
•
Button (5 / 6): Unlocks all curb side compartment doors (relay
banks C-D)
•
Button (7 / 8): Unlocks all driver side compartment doors (relay
banks A-B)
•
Button (9 / 0): Toggles Aux 1 output
Note:
•
See the table on page 9 for S2 DIP switch assignments.
•
Configuration D is the default.
5