TriMark 22272-03, Руководство по установке

Страница: 18 / 28

Assign New Access Codes
With a valid authority code (see page 3 or 14), an access code can be
programmed with the following instructions.
1. Press the (5 / 6) or (3) button for 5 seconds, the keypad will
beep. The backlighting LED of the keypad will flash indicating
the learn mode.
2. Enter in the 5-digit authority code (see page 3 or 14). Keypad
will provide a long beep that will stop after you have defined an
access number.
3. Press and release the button that corresponds to the access
number. For example, press (1 / 2) or (1) button for access #1
and press (3 / 4) or (2) button for access #2. During this activity
you are defining 1 of 5 (4) access numbers. A subsequent code
will be assigned to this access #. The keypad will provide a
confirmation beep after this single button press.
4. Enter in your new 5-digit access code. The keypad will provide
confirmation beeps.
5. Re-enter new access code. The keypad will provide
confirmation beeps.
Repeat process to assign additional access codes.
Up to 5 (4 for doorbell keypad) different access codes can be assigned
at one time. As additional access codes are defined, pre-existing
access codes are overwritten. For example, if a new access code is
assigned for access #3, the previous access #3 code is no longer valid.
The following area can be used to document the access code
assignments.
Access # User Name Digit 1 Digit 2 Digit 3 Digit 4 Digit 5
1
2
3
4
5
15