background image

www.trilithic.com

Page IV-30

120 DSP Operation Manual

Basic Signal Level Meter

120

Single Carrier Channel Measurement

When a single carrier channel is selected, the 

Level

 

screen will display the following information based on 

the settings of the current channel plan:

•  Reference Level (adjustable)
•  Vertical Scale (adjustable)
•  Channel Number (adjustable)
•  Channel Name
•  Center Frequency (adjustable)

Reference Level Adjustment

The reference level can be adjusted from -40 to 

60 dBmV and is the highest value displayed on 

the bar graph. Highlight the reference level field as 

shown in the image to the right and then use either 

of the following methods to change the reference 

level:

•  Use the up/down arrow buttons to change 

the reference level in 1 dBmV increments.

•  Press the

 Enter

 button and use

 

the

 Virtual 

Keyboard

 to directly enter the reference 

level as shown in the image to the right.

Содержание 120 DSP

































































































































































































































































































Отзывы: