TriLink AirProjector KJ-200 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 56

TriLink AirProjector KJ-200 Скачать руководство пользователя страница 11

11

<2> Setting up AirProjector and Projector

This chapter describes the procedure for setting up the AirProjector KJ-200 and projector.

Setting up KJ-200 and Projector

Caution

•

An RGB cable and serial cable are not included with the KJ-200; these cables

must be obtained separately.

1.

Connect AirProjector and the projector with an RGB cable.

Using a standard RGB cable, connect one end of the cable to the RGB port
(Female Mini D-sub 15-pin) on AirProjector, and connect the other end to the RGB
port of the projector.

Point

•

The following marks are printed on the back of the KJ-200.

RGB output port

Serial output port

2.

Turn on the power to your projector.

3.

Set the Input mode of the projector to [Analog RGB].

Point

•

Refer to the owner’s manual of the projector for how to set the Input

source.

4.

Connect the DC plug of the AC adapter to the connector on AirProjector, then

connect the power plug of the AC adapter to a wall outlet.

5.

The projector will display a “

Ready for use

” message. This completes setup of

AirProjector and the projector.

«
...
9
10
11
12
13
...
»

Содержание AirProjector KJ-200

























































Отзывы:

Нет отзывов