11
July, 2018
GSM communicator G16T_3xxx
12.
APN is available on the SIM Operator's web page. The Internet is universal and operates on the networks of many
operators.
When configuration is done, press Save [F5] and disconnect USB cable.
More about other TrikdisConfig G16T_3xxx settings see 5 "Connect G16T_3xxx TrikdisConfig".
Wiring diagrams and installation
Installation
1.
Before installing, make sure that the location where G16T_3xxx is installed has a good GSM signal level.
2.
Remove the top casing, take out contact lining connector part.
3.
Remove the board.
4.
Mount the housing base with screws in the desired location.
5.
Back up the board and contact lining.
6.
Screw down the GSM antenna.
SIM card
1.
Only Nano SIM card is eligible.
2.
SIM card must already be registered on the GSM
network with already enabled and active services,
such as call, send and receive SMS messages, mobile
Internet. Contact your SIM card operator for
information on how to enable services you want.
Note:
Ensure that the SIM card is activated. Make
sure the mobile web service is turned on, if you
use an IP connection.
To avoid entering the PIN in TrikdisConfig,
install SIM card in the phone and turn off the
PIN request function.
