6
July, 2018
GSM communicator G16T_3xxx
Terminal
Description
T-1 / IN1
Clamp for line supervision or can be used as selectable input
R-1 / IN2
Clamp for line supervision or can be used as selectable input
COM
Common (negative)
OUT
Open-collector output
A 485
For future use
B 485
For future use
Light Indication
Indicator
Light Status
Description
Network
Off
No connection to GSM network
Yellow blinking
Connecting to GSM network
Green solid with
yellow blinking
Communicator is connected to GSM network.
Sufficient GSM signal strength is level 5 (five yellow flashes)
Data
Off
No messages in buffer
Green solid
Unsent messages in communicator`s memory
Green blinking
(Configuration mode) Data is transferred to/from communicator
Power
Off
No power supply
Green solid
Power supply is sufficient and microcontroller is functioning
Yellow solid
Power supply is insufficient (≤11.5V), microcontroller is functioning
Green solid and
yellow blinking
(Configuration mode) Communicator is ready for configuration
Yellow solid
(Configuration mode) No connection with computer
Trouble
OFF
No operation problems
1 red blink
No SIM card
2 red blinks
SIM card PIN code problem (incorrect PIN code)
3 red blinks
Programming problem (No APN)
4 red blinks
Registration to GSM network problem
5 red blinks
Registration to GPRS/UMTS network problem
6 red blinks
No connection with the receiver
7 red blinks
Lost connection with control panel
Red blinking
(Configuration mode) Memory fault
Red solid
(Configuration mode) Firmware is corrupted
Note:
Before configuration, make sure that you have all the necessary components:
1)
USB Mini-B cable required for configuration..
2)
At least 4 wired cable for connecting the communicator to the control panel.
3)
Flat-head screwdriver.
4)
Sufficient gain GSM antenna
5)
Activated nano-SIM card (PIN code request may be disabled).
