www.trikdis.com
13
February, 2020
“Ethernet” communicator
E16
3.4
Connect LAN cable
3.5
Schematics for wiring a relay
With relay contacts you can control (turn on/off) various electronic
appliances. The I/O terminal of the communicator must be set to an
output (OUT) mode.
3.6
Schematics for connecting iO series expansion modules
If more inputs or outputs need to be connected to the communicator, or if you want to connect a temperature sensor, connect
the TRIKDIS
iO
series wired or wireless output expander. Configuration of expander modules connected to the
E16
is described
in chapter 6.6 ““RS485 modules” window”.
3.7
Turn on the communicator
To start the communicator, turn on the security control panel’s power supply. This LED indication on the
E16
communicator
must show:
“POWER” LED illuminates green when the power is on;
“NETWORK” LED illuminates green, when the communicator is connected to the network.
