Trident TVGA 9000I, Руководство пользователя

Страница: 43 / 64

redraw?”
3.
To use the Autoshade driver along with AutoCADBSGprotected mode
drivers, type
DSVGAR
-P
before entering Autoshade. This switch
will install only the Autoshade rendering driver and not the
AutoCAD
ADI driver.
'
3.1.2 AutoCAD/386
Release
10
and
11
(PDI
Driver)
1.
To install the
drivers for AutoCAD/386, release
10
and
11,
you will
need
to
copy the display driver from
the \TVGAUTIL\ACAD386
directory on your hard driver to your AutoCAD/386 directory. For
example, if your AutoCAD/386 directory is in your
C:
drive, and the
driver/utility
is
installed in your
D:
drive type:
Copy
D :
\rvanunnmcnnsssmcprvon.
exp
c: \Acrmsss
The displaydrivers(RCPTVGAEXP) will
be copied to yourAutoCAD/
386 directory
(e. g.
C:\ACAD386).
2.
The command SET DSPADI
=
RCPTVGA must now be added
to
your
Autoexec.bat file.
Use any ASCII text editor (e.g. DOS 5.0 EDIT.EXE
command) to modify
the
Autoexeebat tile in the root directory
of
your
boot disk drive. Re-boot your system after the Autoexeebat file has
been modified.
3.
The remaining steps need
to becompleted inside AutoCAD. They are
listed
in a text window. You may note them down or reference steps
5
through
8.
4. Run ACAD.I3XE from the AutoCAD/386 directory.
5.
Select
in order, Configure AutoCAD, Configure
Video Display and
ADI P386 Display.
6.
Choose one
of
the
graphics drivers.
7. A number
of
prompts follow which allow you
to
select the graphics
area background color, text color (for
the
menu, status line, and com-
Software
-
13