Trident Emergency Products, LLC
2940 Turnpike Drive | Suite #9 | Hatboro, PA 19040 USA
6
FOAMATE
™ 2.1 ATP Foam System
FOAMATE
™
2" PVC Pickup Tube
2" x 10-Foot Pickup Hose
With Camlock Couplings
Standard Foam Tote
275-Gallon [1,000 Liter]
Auxiliary Foam Concentrate Supplies
Auxiliary Foam
Connection Piping
to Terminate with
2" MNPT Thread
2" Camlock Cap
for Pump Panel
Connection
(Supplied With Pick-up Kit)
Standard Foam Drum
55-Gallon [208 Liter]
2" Male Camlock Plug
with 2" FNPT Thread
for Connection to
System Piping
(Supplied With Pick-up Kit)
Water From a Pressurized Source
Must Not Exceed 5 PSI (0.35 Bar)
2" FNPT Swing
Check Valve
(Supplied With Kit)
Foamate™ 2.1
ATP Eductor
(Supplied With Kit)
Apparatus
On-Board
Water Tank
Apparatus
On-Board
Foam Tank
All Foamate 2.1 Piping
to be a Minimum of 2" ID.
All Piping To Be Supplied
By System Installer.
Foamate 2.1 ATP
2" Metering Valve
(Panel Mounted, Supplied With Kit)
Pump Panel
Wat
er Pump
◆
◆
◆
◆
Three 2" Ball Valves
Provided with Kits
that include valves.
2" Ball Valve
available for
Auxiliary Foam Inlet
(P/N 30.058.0)
2" PVC Pickup Tube
With Ball Shut-off
46"
(1160 mm)
35"
(890 mm)
Piping Schematic
FOAMATE 2.1
Piping Schematic
Shown below is the typical installation of the FOAMATE 2.1 ATP Foam Proportioning System.
Three (3) Ball Valves
are
Provided with Kits that Include Valves
Figure 4