- 2 -
1. Remove the Wing Screws (2) & Belt Guard. Bag &
label the Wing Screws.
2. Remove the Workrest Assy.
3. Remove the Idler Wheel Assy.
4. Remove the Contact Wheel.
5. Bag & label the Contact Nut & Washer.
6. Remove the Workrest Arm Assy.
7. Remove the Belt Guard Guide (3 pcs), bag & label.
8. Remove the Belt Guard Standoffs (2).
9. Remove the inside Platen Screws (2), bag & label.
10. Remove the Platen Mount Screws (4) & Platen
Mount, bag & label the Platen Mount Screws.
11. Remove the Idler Guard.
12. Replace the Idler Wheel Screw.
-End of procedure-
