Tricel NOVO EN6-50, Руководство пользователя

Страница: 19 / 39

19
Lift tank into position and align height for connecting pipe work.
 
Ensure correct inlet and outlet orientations of the plant, which may
contain 1 or more tanks.
 
Ensure that each tank is 100% level.
 
Connect pipe work, as required.
 
Ballast the tank with water. Refer to detailed installation
 
Commence gravel backfilling in 300mm layers approximately up to
50mm over the cylindrical body of the tank, ensuring tank and any pipe
work is properly supported.

Commence concrete backfilling in 300mm layers approximately up to
the pipe work level, ensuring tank and any pipe work is properly
supported.

Continue backfilling with gravel up to 50mm over the cylindrical body
of the tank

Mount and seal any turret extensions.
 
Complete backfilling with topsoil up to the max ground level line
indicated on the plant. The surrounding finished ground level should
never be higher than the “max ground level line”.
 
Compact evenly around the tanks to ensure it’s is properly supported.
 
An access chamber should be installed before and after the tank for
sampling and to assist in clearing possible blockages
 
If sewage consists of high quantities of grease a grease trap should be
installed prior to the plant.
 
Note: The option of a reinforced concrete slabs or deadman anchor may also be used on wet sites. This
should be designed by an on-site structural engineer to suit site conditions.