Tribe MINIVERSAPAR, Руководство пользователя

Страница: 12 / 32

MINIVERSAPAR 10
3. 7 COLOR
If no DMX control signal is present at the DMX INPUT, the unit independently runs through its show pro-
gramme provided that the blackout mode is switched off:
• Press the button MENU so many times until the display shows
Color , then press the button ENTER.
• Press the button UP/DOWN to switch between the show C 1, ... , C 15 . The unit will operate in show mode.
• Press the button ENTER to save the setting.
3. 8 AUTO SHOW
This fixture has a built-in automatic program. To access this, please see the below instructions:
• Press the button MENU so many times until shows
P-- , then press the button ENTER.
• Using UP/DOWN button, select one of the programs P1 - P4 .
• Press the button ENTER to confirm.
• Press the button MENU until
S-- appears on the display.
• Use the button UP/DOWN to select the auto programs speed S001 - S100 (slow-fast).
• Press the button ENTER save the setting.
3. 9 SOUND MODE
In music mode, via its integrated microphone, the unit can be controlled by music with a clear rhythm in
the bass range. If the music control should not work optimally, increase the volume or reduce the distance
between the sound source and the light effect unit.
• Press the button MENU so many times until the display shows
Snd.
• Using UP/DOWN button, select one of the modes Snd1 or Snd2 .
• Press the button ENTER to confirm.
• You can set the microphone sensitivity pressing the button MENU so many times until the display show
Sens
• Using the button UP/DOWN, select the desired value sensitivity (slow-fast) u0 - u100.
• Press the button ENTER to confirm.
3. 10 MANUAL COLOR
This mode allows to adjust the color (uv) .
• Press the button MENU so many times until the display shows U-- , then press the button ENTER.
• Press the button ENTER to confirm.
• Using UP/DOWN button, select the desired color value
000 - 255.
• Press ENTER button to continue to the next color R, G, B, W .
• Continue until the desired color is obtained.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3. 11 DIMMER
• Enter in Dimmer mode to select specific dimming curve, press the button MENU so many times until
shows dIM , and press the button ENTER to confirm.
• Press the button UP/DOWN to select OFF - dIM1 - dIM2 - dIM3 .
• Press ENTER button to store.
• Press the MENU button to go back or to meet the waiting time to exit the setup menu.
3. 12 UNIT TEMPERATURE
Through the TEMP function you can display the temperature of the projector.
• Press the MENU button so many times until the display shows
TEMP , then press the button ENTER.