manualshive.com logo in svg

Triax TDH 800, Руководство по настройке, Страница: 17 / 18

Поделиться
Скачать
Triax TDH 800 Скачать руководство пользователя страница 17

Configuring COFDM output modules 

17 

 

 

 

The remaining slots on the output module can now be configured in the same 

manner. 

Modifying 

1. Press the Setup button for the output module to be modified. 
2. Make the desired changes. 

3. Press the Update button. 
4. Press the Submit button. 

5. Press the Apply button in the Configuration window 

Deleting 

1. Press the Delete button of the output module to be removed. 

A confirmation popup is displayed. 

 

 2. Press Yes to remove the output module. 

The output module is displayed in red in the Output tab. 

3. Turn off the headend. 

4. Physically remove the output module from the headend. 

5. Restart the headend. 
6. Restart the service tool. 

The output module will no longer be listed in the output module list. 

Configuring COFDM output modules 

16 

 

 

 3. Press the Apply button. 

The following confirmation is displayed. 

 

 

The services selected are visible in the Channel list tab. 

Содержание TDH 800



















Отзывы:

Нет отзывов