If you are using the Set Top Box (STB) for the first
time, the ‘Installation Guide’ menu appears. Press
the cursor button to setup the OSD Language
and Country settings. Highlight “Channel Search‘,
then press the “ok” button to enter “Dish Setup”
menu.
In “Dish Setup” menu, Astra 28.2° East is set
as the default satellite. If a different satellite is
required press the ‘UP’ or ‘DOWN’ button to
select the Satellite. Press “OK’ button to select.
Select the ‘RIGHT’ button to enter the setup
menu. To scan the selected satellite press the
“BLUE” button.
This menu allows you to change settings like LNB
Type, SatCR_Number. SatCR_Frequency, LNB
Power, 22K Hz, Toneburst, DiSEqC 1.0, DiSEqC
1.1 and Motor. Press ‘EXIT’ button to exit the
setup menu.
Installation Guide
Getting Started
On the “Dish Setup “ menu the following options
are also available:
GREEN button:
Edit satellite
RED button:
Add satellite
YELLOW button:
Delete satellite
BLUE button:
Search Channels
Press the “GOTO’ button to enter the
Transponder menu. Pressing “GOTO” again
takes you back to the “Dish Setup” menu.
GREEN button:
Edit Transponder
RED button:
Add Transponder
YELLOW button:
Delete Transponder
BLUE button:
Search Transponder for
Channels
When the selected scan is complete, all active
channels found will be stored automatically.
To stop scanning at any time, press the EXIT
button. The channels already found will be
automatically stored.
9