Digital Terrestrial Receiver -
T R IAX
4 1
Receiver
4 1
Troubleshooting
Check the main power cord and check that it is plugged
into a suitable power outlet.
Check whether STB is in Standby mode.
Ensure that the STB is switched on (see above).
Check the video output port (VIDEO or RF OUT) is
firmly connected to the TV or VCR.
Check that you have selected the correct channel or
Video Input on your TV.
Check the brightness level of the TV.
See “No Picture” above.
Check the signal level, if this is low then try to
adjust the alignment of your antenna.
See “No Picture” above.
Check the volume level of the TV and STB.
Check the Mute status of the TV and STB.
Point Remote Control Unit directly towards the STB.
Check and replace batteries.
Check the “Signal Strength” and the “Signal Quality” in
the channel list or channel search menu.
Adjust the direction of your antenna.
Does not display any
message on the front panel
or STB has no power.
No Picture
Poor picture quality
No Sound
Remote Control does not operate
No or Bad Signal
Problem
Solution
Something wrong with STB
About On-Screen Error Message