![background image](http://html1.mh-extra.com/html/triax/ccs-1000-s/ccs-1000-s_assembly-instructions-manual_1160854019.webp)
- 19 -
- 19 -
Selecting the input data stream
In this menu you select the signal source for the selection of
the services. The data streams to be processed are provided
by ”
Tuner A
”, ”
Tuner B
” and the ASI interface ”
ASI
”.
• Press the
buttons to select the signal source of the
input data stream (”
Tuner A
”, ”
Tuner B
”, ”
ASI
”).
—> ”
OK
” indicates that an input signal is available. If
there is no input signal available ”– –” is displayed
instead of ”
OK
”.
• Press the
▶
button.
—> The “Setting the LNB oscillator frequency” – “
LNB
”
menu is activated.
Setting the LNB oscillator frequency
Set the oscillator frequency of the LNB used in this menu.
• Using the
button the oscillator frequencies ”
10600
“
or ”
9750
“ can be selected directly.
• To set other oscillator frequencies use the
▶
◀
/
buttons to
place the cursor under the digit of the oscillator frequency
displayed to be set.
• Press
to enter the respective digit of the oscillator
frequency of the LNB used.
• Repeat the procedure by the quantity of the digits to be
set.
Tuner A /
Tuner B /
ASI
Bx 4A
10600 MHz
LNB
Å
Ï
/
Å
Bx 4
Tuner A
OK
INPUT
=>
D
10600 / 9750
Bx 4A
10600 MHz
LNB
Å
Ï
/
Å
10600 / 9750
Tuner A /
Tuner B /
ASI
Bx 4A
10600 MHz
LNB
Å
Ï
/
Å
Bx 4
Tuner A
OK
INPUT
=>
D
10600 / 9750
Tuner A /
Tuner B /
ASI
Bx 4
Tuner A
OK
INPUT
=>
D
D