![background image](http://html1.mh-extra.com/html/triax/ccs-1000-s/ccs-1000-s_assembly-instructions-manual_1160854031.webp)
- 31 -
- 31 -
Displaying the output data rate
In this menu the current data rate is displayed.
Saving settings
• Press the
M
button.
—> The settings are saved.
—> You will be returned to the menu item “Selecting the
cassette” via connection
A
(page 15).
—> By pressing the
button, you will be returned
to the menu item “Setting the Ethernet parameters” via
B
without
saving the programmed data (page 16).
5.2.1 Operation with a CA module
In order for this function of the CA module to be possible, in
the “Selecting the input data stream” – “
INPUT
” menu (page
19) an input signal source must be selected whose data
stream contains services which can be decoded by the CA
module you are using and your smart card. Where both en-
crypted and unencrypted services are transmitted, short-term
picture loss may occur when switching between encrypted
and unencrypted services.
Setting the operating voltage for the CA module
In this menu the operating voltage for the CA module can
be set.
A
M
B
Bx 4
72.956 Mbps
DATARATE
Bx 4A
Supply
CA
5.0 V
3.3 V / 5.0 V
C