AEM-CAPXX-PF-EVK Solar Development Kit with e-peas PMIC and CAP-XX Supercapacitors
PowerFilm, Inc. • 1287 XE Place • Ames, IA 50014 USA • www.powerfilmsolar.com • 515-292-7606
5/22
Step 1:
AEM10941 Configuration
MPPT Ratio:
Defined to 70%
Storage Element Voltages Protection:
CFG2-CFG1-CFG0
BAL Option:
Select “CON” for dual-cells super capacitor and “GND” for any other storage.
PRIM Option:
Connect both jumpers “NoPRIM” or remove them if a primary battery is connected.
Define minimum voltage using R7 and R8.
LDOs Output Voltages:
ENHV [HVOUT] - ENLV [LVOUT]
Step 2:
Connect the storage element or solder a CAP-XX
super capacitor on the bottom layer (refer to the table on the following page)
Step 3:
Connect the Load(s) to HVOUT / LVOUT
Step 4:
Connect the PowerFilm Photovoltaic module to SRC
Step 5:
Set up complete! See User Guide for additional details and advanced configurations.
Quick Start Guide
